how to install silverlight on android phone

For previous Android versions you might have to touch and hold the name of the connected network, then tap Modify, and expand Advanced Settings. Select Edit and expand Advanced Settings. For the GenyMotion emulator, the default IP is of the 10.0.3.XXX type. In most cases, the IP of the Android emulator is of the 10.0.2.XXX type. (Android emulators only) Check the IP address of the emulator. For demonstration purposes, let's assume the device IP is 192.168.0.222. (Real devices only) Check the IP address of the actual Android device. Open the connected Wi-Fi and tap Settings. The following steps are applicable for real devices and emulators (also known as AVDs) with some minor differences as described below.Ĭheck the IP address of the Android device. For demonstration purposes, let's assume that the local IP of the Fiddler Everywhere machine is 192.168.0.101.ĭepending on the environment, an Android emulator might not support ICMP, which is used for 'ping'. To obtain the IP address, for example, ipconfig on Windows or ifconfig on Linux, you can use the built-in OS tools or the Fiddler Everywhere connection status icon on the lower right-hand side of the client.

Make sure that the machine on which Fiddler Everywhere and the Android device run is discoverable on the same network-for example, 192.168.0.0.Įnable the remote connections in Fiddler Everywhere through Settings > Connections > Allow remote computers to connect.Ĭheck the IP address of the machine where Fiddler Everywhere is running.

Inspect the Android application traffic.To capture and inspect traffic on Android devices, perform the following steps: This article describes how use Fiddler Everywhere to capture and inspect traffic that comes from Android devices and emulators. Traffic Inspection & Analysis Capturing and Inspecting Android Traffic

How to install silverlight on android phone